Skip to content

Complete the Court

Court Lighting & Fencing in Loudoun County

Play after dark and keep the court secure, lighting and fencing built in from day one.

  • On-Site Evaluation
  • Itemised Estimate
  • Final Walkthrough
Sports court with installed LED pole-mounted lighting fixtures and perimeter chain-link fencing in a residential setting.

What Goes Wrong

The cost of adding lighting and fencing after the surface is finished

Retrofit Cutting

Installing conduit after the surface is laid means cutting into finished acrylic, which creates crack points and voids the surface warranty.

Conduit Set in Base

Conduit runs and post footings are set during excavation, before sub-base compaction, so no finished surface is ever disturbed.

Generic Fixture Spec

A fixture chosen by pole height alone often delivers uneven coverage, leaving dark corners on a tennis or pickleball court.

Sport-Matched Foot-Candles

Each fixture is specified by foot-candle output and beam pattern for the intended sport, so coverage meets play requirements across the full court.

Misplaced Gate Cuts

Fencing installed without a confirmed site plan often places gates where they conflict with court access or HOA design review requirements.

Gate Locations Confirmed First

Gate placement is locked in during the on-site evaluation and built into the base preparation plan before any fencing material is ordered.

Hidden Add-On Costs

Bundled lighting and fencing quotes hide unit costs, making it impossible to adjust scope without repricing the entire project.

Separate Line Items

The written estimate lists pole count, fixture spec, fencing height, and gate locations as individual line items so scope adjustments are straightforward.

How It Works

Lighting & fencing installed as part of the court project

Adding lighting and fencing after the surface is finished costs more and risks damage to the completed court.

Request an Estimate

Conduit for lighting circuits and post footings for fencing are best set during excavation, before the sub-base is compacted. Retrofitting them later means cutting into a finished surface. The on-site evaluation confirms pole placement, fencing line, and gate locations so those elements are built into the base preparation plan.

LED court lighting fixtures are specified by foot-candle output for the intended sport. Pickleball and tennis require different coverage patterns than a basketball half-court. The itemised estimate lists fixture count, pole height, and circuit spec separately so you can see exactly what the lighting portion of the project costs.

Fencing options include galvanized chain-link and vinyl-coated chain-link in standard heights from 8 to 12 feet. Gate placement is confirmed during the on-site evaluation. The final walkthrough checks post plumb, gate swing, and fixture aim before the project is signed off.

Why Us

Why Loudoun Sports Courts for lighting & fencing?

Accountability built into every stage, from the first site visit to the final walkthrough.

On-Site Evaluation Before Any Estimate

Every project starts with a site visit to assess drainage, pole placement, and fencing lines before a number is written.

Itemised Written Estimate

Lighting and fencing appear as separate line items, so you can adjust scope without repricing the whole court build.

Integrated Scheduling

Conduit and post footings are coordinated with excavation, keeping the project on a single timeline with no return visits.

Signed-Off Final Walkthrough

Post plumb, gate swing, and fixture aim are all verified on-site before the job is considered complete and signed off.

A large stone and siding house with a covered porch, an outdoor tennis court, and a landscaped garden with a koi pond.
An outdoor blue and green pickleball or multi-use sports court with a black chain-link fence, next to a modern white house on a sunny day.

The Process

From first call to finished court

Request an Estimate

  1. 01

    Request an Evaluation

    We arrange a free on-site visit to confirm pole placement, fencing line, gate locations, and drainage before writing any estimate.

  2. 02

    Review Your Estimate

    You receive an itemised written estimate with lighting and fencing as separate line items so scope is easy to adjust.

  3. 03

    Complete the Walkthrough

    Once installed, we walk the finished court with you to verify post plumb, gate swing, and fixture aim before sign-off.

Pricing Estimates

Typical Court Lighting & Fencing Prices

JobTypical cost
Court lighting, per light$50-$200
Lighting package$5,000-$10,000
Fence installation$4,000-$12,000
Pickleball fence enclosure$4,000-$7,200
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Questions about court lighting & fencing

  • Can lighting and fencing be added to a court that is already built?

    Yes, but it costs more. Running conduit after the acrylic colour coat is down requires cutting into finished surfacing. Scoping both elements before the surface goes down avoids that extra work and keeps the court surface intact.

  • What lux level do I need for evening tennis or pickleball?

    Recreational play typically requires 30-50 lux at court level. Competitive play calls for 75 lux or more. The builder confirms the right fixture count and pole height for your court dimensions during the on-site evaluation.

  • Will my HOA approve the fencing colour?

    Chain-link, vinyl-coated and powder-coated steel options are reviewed against your HOA colour requirements before materials are ordered. Bringing HOA specs to the evaluation avoids a rejection and a second installation.

  • How deep do fencing posts need to be in Loudoun County soil?

    Clay-heavy soil and freeze-thaw cycles in Loudoun County typically require posts set at least 36-42 inches deep. The builder confirms exact post depth during the on-site evaluation based on actual soil conditions at your site.

  • What happens if I delay adding lighting or fencing?

    Retrofitting conduit after surfacing means cutting into the finished acrylic coat, which leaves visible repair lines and adds labour cost. Fencing posts installed later may also conflict with court line positions already painted on the surface.

  • Is electrical work for court lighting permitted in Virginia?

    Yes, electrical installations require a permit and must be completed by a licensed Virginia electrician. The builder coordinates the electrical permit and licensed electrician as part of the scoped project, so you do not manage that separately.

More questions about Court Lighting & Fencing?

Tell Us Your Site & Sport

Share your space and what you want to play, and we’ll arrange an on-site evaluation and a written estimate.

Request an Estimate